Nanolex Si3D Matte
Nanolex Si3D Matte is a specialist coating for matte paints and surfaces. It is designed to form an extremely long lasting chemical bond with the matte surface, offering protection without any enhanced gloss or shine. This sealant can be used on all matte paints, vinyls and surfaces keeping them cleaner for longer and making cleaning easier. It offers strong durable protection over delicate matte surfaces, leaving behind a natural flat sheen.
Nanolex Si3D Matte was developed, tested and produced in Germany.
superb hydrophobicity easy to clean surface increased hardness outstanding durability *no added gloss
30ml/50ml
Usage
How to use Nanolex Si3D Matte
Processing temperature: 5-30°C - Avoid direct sunlight and/or high air humidity.
Nanolex Si3D Matte can be applied directly to all clear-coated (lacquered) surfaces. The lacquer surface must be dry and free of any contamination or dust. We strongly recommend to use Nanolex EX directly before the application to make sure that all oils/fillers and other dirt are removed completely from the surface. Use Nanolex microfiber towels and turn or exchange cloth frequently during cleaning/polishing.
If the car was machine polished before the application it is absolutely necessary to remove any (mostly invisible) fillers and oils – if those are not removed a white or grey hazing will appear on the paint once Si3D Matte was applied. The paint sealant layer itself is too thin to be visible and can easily buffed off – only fillers and oils will become visible. We recommend to wash the car with Nanolex PreWash after the paint was machine polished to safely remove the majority of the contamination.
Spread 5-10 drops/m2 of Nanolex Si3D Matte on a microfiber applicator pad and apply it sparingly by rubbing in with light pressure in criss-cross motions. Remove the coating residue with a soft microfiber cloth after a maximum of 3 minutes. There is no pressure necessary to remove it completely.
Let Nanolex Si3D Matte cure on the surface for at least 12 hours (at ambient temperature, assuming 20°C) before the first water contact. Do not wash the car within the first 72 hours.
Curing time depending on temperature: @50°C: 3-4 hours @80°C: 2 hours
Your car is now protected with a Nanolex Car Care coating
It is now much easier to clean because dirt just can’t stick to the surface as before, but it will still become dirty at some point. You don’t need as much cleaners as before, also the cleaners that you use don’t need to be very harsh to remove all the dirt that has settled on the surface. This is why we’d like you to consider the environment and not to use harsh chemicals.
Important:
The sealed surfaces should not be covered with other products such as wax or polymer sealants. Those products cover the coating layer and thereby the easy-to-clean effect that it provides. Please also keep in mind that abrasive polishes will remove the protective layer.
To make sure the sealant has maximum durability and performance please be advised: In general we recommend to always wash the car by hand using Nanolex Car Care maintenance products. This way the condition of your paint will be preserved since much less micro-scratches will be inflicted. Also Nanolex products will guarantee that the coating layer is preserved, it will even add performance and durability to it if you use Nanolex Reactivating Shampoo, Nanolex WashCoat or Nanolex Final Finish. If you wash the car the by hand, please make sure that you are always using a high quality wash mitt and drying towels to make sure that scratches and marring is avoided as far as possible. If the car is cleaned in automated car washes make sure that soft textiles are used for cleaning to avoid major damage to the cars' exterior.
It is not necessary to use highly alkaline or acidic wheel cleaners – the protective layer that is now on the wheels makes them much easier to clean – Nanolex Wheel Cleaner & Iron Remover will absolutely suffice to clean the wheels completely and gently.
We always recommend you read the manufacturers instructions before use.
Delivery
We offer a number of shipping methods for
Nanolex Si3D Matte
based on your location and the weight of the ordered items. We always aim to offer
you delivery of your products by the cheapest method for the total weight of your
order.
Indian Mainland Delivery:
We try to use our preferred delivery specialists DTDC, Bluedart and India Post Speed Post where possible. We also offer a variety
of courier delivery methods which generally require a signature. Some liquid products might take longer to arrive due to the method they have to be sent by.
These are couriers that particularly offer a good service to deliver our car care products to locations such as Bangalore, Chennai, Kerala and Mumbai.
International Delivery:
Detailed Clean India are more than happy to ship internationally the Nanolex Si3D Matte, for an accurate quote add the item to your basket
and then view the shopping cart where you can get an accurate shipping price based
on the weight of the order.
Just some of the countries we deliver to are:
Australia, Brunei, China, Hong Kong, Indonesia, Japan, Malaysia, Nepal, Pakistan, Singapore, South Korea, Sri Lanka, Taiwan, Thailand and UAE.
Nanolex Si3D Matte
We think customers reviewing the car care and car detailing products we sell is a
great idea, as these review not only help out your fellow car care enthusiast but
are also unbiased and trustworthy.
Therefore, why dont you be the first to review
the Nanolex Si3D Matte?
Write your own review.