Gtechniq Crystal Serum Light 30ml

Gtechniq Crystal Serum Light 30ml

Gtechniq Crystal Serum Light 30ml is the prosumer version of the world famous Gtechniq Accredited Detailer only Crystal Serum - a coating so hard that if applied incorrectly can only be removed by using 1,500 grit sand paper.

When it comes to adding gloss, resisting swirls, contaminant and dirt repellency, Gtechniq Crystal Serum and Serum Light are the pinnacle in paint protection.

Gtechniq Crystal Serum Light offers 80% of Professional Serum’s performance, but if applied incorrectly can be machine polished from your vehicle’s paintwork.

• 3 to 5 years durability
• Best possible swirl mark and chemical resistance from a prosumer grade product
• Incredible gloss

Gtechniq Crystal Serum Light offers many of the benefits of the accredited detailer only coating Crystal Serum. Gtechniq Crystal Serum Light forms a durable, high gloss, slick to the touch, chemically bonding inorganic layer of 9h optically clear ceramic which offers fantastic resistance to wash swirls. Gloss levels will remain in the upper 90th percentile for significantly longer compared to traditional paint sealants and cleaning your vehicle will be easier.

The coating is resistant to chemicals ranging from pH2 to pH12 and bonded contaminants such as tree sap, tar and water spots are much easier to remove. CSL is unlike mainstream waxes and organic polymer coatings as it can resist extreme temperatures as low as -40° and as high as 250°c.

Gtechniq Crystal Serum Light can be applied as a stand alone product however for the ultimate hydrophobic performance overcoating with Gtechniq EXO or C2 is recommended. With the Crystal Serum professional coating should it be applied incorrectly it would require sanding and polishing to remove, however Crystal Serum Light will not require sanding and only polishing to remove.

We do not recommend that those who are completely new to “detailing” attempt to apply this product.

PLEASE BE AWARE THAT IF YOU MISSAPPLY THE PRODUCT WE WILL NOT BE RESPONSIBLE FOR ANY LOSS OR DAMAGE SUFFERED BY YOU TO YOUR VEHICLE AS A RESULT OF INCORRECT APPLICATION OF CRYSTAL SERUM LIGHT

30ml

Usage

• To apply CSL your vehicle must be indoors and it must remain indoors for at least 12 hours after application Wash and then decontaminate your vehicle’s paintwork with Gtechniq W5 Citrus All Purpose Cleaner and W6 Iron and General Fallout Remover. If required, clay your paintwork to remove other bonded contaminants
• If needed, polish your paintwork, either by machine or by hand, to remove any imperfections
• Spray Gtechniq Panel Wipe onto a Gtechniq MF1 ZeroR Microfibre Buff Cloth
• With your panel fully cooled after polishing, taking care to avoid any paint protection film or other types of vinyl film, buff away all polish residues. This process ensures you will get the maximum number of chemical bonds between the coating and your vehicle’s paintwork
• Put on the gloves provided to prevent CSL coming into contact with your skin
• Soak the application pad with two full measures from the pipette and work the liquid into the pad to get an even saturation
• Replace the lid on the bottle and set aside - do not keep the bottle in your hand as this promotes premature curing
• Apply with applicator provided in overlapping strokes to an area roughly 2’ x 2’, or work to the bodylines of the vehicle
• After coating a single small panel or half a larger panel, remove residue with MF1 ZeroR Microfibre Buff Cloth. Always remove from further than you have applied, working from the outside in. It is essential to check for residue
• You may need to buff the same area several times to remove residue. We recommend using two microfibre cloths at any one time. Please note that you are only removing excess product
• When working with coatings, we recommend you inspect the panels with a bright but diffuse light source, not with bright spot lights which are very poor for spotting coating residue
• Avoid buffing with too much force as this can spoil the surface you are protecting, and you may also drag the partially cured coating off the surface
• Take care that the microfibre cloths you are using are rotated sufficiently and quickly so that CSL does not partially cure in the cloth, if it does cure then buffing residue will be significantly more difficult
• If you miss removing residue and it cures fully, you should re-polish this area, and reapply CSL
• As soon as you finish put the microfibres in water, and wash and dry them as soon as possible
• Use CSL within 1 year of purchasing, for best results, once opened use within 3 months
• Store opened bottles in a dry and cool storage area that is out of direct sunlight

We always recommend you read the manufacturers instructions before use.

Delivery

We offer a number of shipping methods for Gtechniq Crystal Serum Light 30ml based on your location and the weight of the ordered items. We always aim to offer you delivery of your products by the cheapest method for the total weight of your order.

Indian Mainland Delivery:

We try to use our preferred delivery specialists DTDC, Bluedart and India Post Speed Post where possible. We also offer a variety of courier delivery methods which generally require a signature. Some liquid products might take longer to arrive due to the method they have to be sent by.

These are couriers that particularly offer a good service to deliver our car care products to locations such as Bangalore, Chennai, Kerala and Mumbai.

International Delivery:

Detailed Clean India are more than happy to ship internationally the Gtechniq Crystal Serum Light 30ml, for an accurate quote add the item to your basket and then view the shopping cart where you can get an accurate shipping price based on the weight of the order.

Just some of the countries we deliver to are:
Australia, Brunei, China, Hong Kong, Indonesia, Japan, Malaysia, Nepal, Pakistan, Singapore, South Korea, Sri Lanka, Taiwan, Thailand and UAE.